21 10 2015
Braindump2go Provides Instant Free Download for Cisco 300-208 Exam Dumps PDF! (161-170)
CISCIO NEW UPDATED: New Updated 300-208 Exam Questions from Braindump2go 300-208 PDF Dumps and 300-208 VCE Dumps! Welcome to Download the Newest Braindump2go 300-208 VCE&PDF Dumps: http://www.braindump2go.com/300-208.html (89 Q&As)
Braindump2go New Released 300-208 Cisco Exam Dumps Free Download Today! All 194q 300-208 Exam Questions are the new updated from Cisco Official Exam Center.Braindump2go Offers 300-208 PDF Dumps and 300-208 VCE Dumps for free Download Now! 100% pass 300-208 Certification Exam!
Exam Code: 300-208
Exam Name: Implementing Cisco Secure Access Solutions
300-208 sisas,300-208 sisas pdf,300-208 sias book,300-208 sisas training,300-208 sisas implementing cisco secure access solutions,300-208 dumps,300-208 pdf,300-208 Book
What endpoint operating system provides native support for the SPW?
A. Apple iOS
B. Android OS
C. Windows 8
D. Mac OS X
Which condition triggers wireless authentication?
A. NAS-Port-Type is set to IEEE 802.11.
B. Framed-Compression is set to None.
C. Service-Type is set to Framed.
D. Tunnel-Type is set to VLAN.
Which feature enables the Cisco ISE DHCP profiling capabilities to determine and enforce authorization policies on mobile devices?
A. disabling the DHCP proxy option
B. DHCP option 42
C. DHCP snooping
D. DHCP spoofing
With which two appliance-based products can Cisco Prime Infrastructure integrate to perform centralized management? (Choose two.)
A. Cisco Managed Services Engine
B. Cisco Email Security Appliance
C. Cisco Wireless Location Appliance
D. Cisco Content Security Appliance
E. Cisco ISE
Which two options are EAP methods supported by Cisco ISE? (Choose two.)
You configured wired 802.1X with EAP-TLS on Windows machines. The ISE authentication detail report shows “EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain.” What is the most likely cause of this error?
A. The ISE certificate store is missing a CA certificate.
B. The Wireless LAN Controller is missing a CA certificate.
C. The switch is missing a CA certificate.
D. The Windows Active Directory server is missing a CA certificate.
What type of identity group is the Blacklist identity group?
E. denied systems
Which feature must you configure on a switch to allow it to redirect wired endpoints to Cisco ISE?
A. the http secure-server command
B. RADIUS Attribute 29
C. the RADIUS VSA for accounting
D. the RADIUS VSA for URL-REDIRECT
The Secure-X company has recently successfully tested the 802.1X authentication deployment using the Cisco Catalyst switch and the Cisco ISEv1.2 appliance. Currently, each employee desktop is connected to an 802.1X enabled switch port and is able to use the Cisco AnyConnect NAM 802.1Xsupplicantto log in and connect to the network.
Currently, a new testing requirement is to add a network printer to the Fa0/19 switch port and have it connect to the network. The network printer does not support 802.1X supplicant. The Fa0/19 switch port is now configured to use 802.1X authentication only.
To support this network printer, the Fa0/19 switch port configuration needs to be edited to enable the network printer to authenticate using its MAC address. The network printer should also be on VLAN 9.
Another network security engineer responsible for managing the Cisco ISE has already per- configured all the requirements on the Cisco ISE, including adding the network printer MAC address to the Cisco ISE endpoint database and etc…
Your task in the simulation is to access the Cisco Catalyst Switch console then use the CLI to:
– Enable only the Cisco Catalyst Switch Fa0/19 switch port to authenticate the network printer using its MAC address and:
– Ensure that MAC address authentication processing is not delayed until 802.1Xfails
– Ensure that even if MAC address authentication passes, the switch will still perform 802.1X authentication if requested by a 802.1X supplicant
– Use the required show command to verify the MAC address authentication on the Fa0/19 is successful
The switch enable password is Cisco
For the purpose of the simulation, to test the network printer, assume the network printer will be unplugged then plugged back into the Fa0/19 switch port after you have finished the required configurations on the Fa0/19 switch port.
Note: For this simulation, you will not need and do not have access to the ISE GUI To access the switch CLI, click the Switch icon in the topology diagram
Answer: Review the explanation for full configuration and solution.
Initial configuration for fa 0/19 that is already done:
AAA configuration has already been done for us.
We need to configure mac address bypass on this port to achieve the goal stated in the question.
To do this we simply need to add this command under the interface:
Then do a shut/no shut on the interface.
The Secure-X company has started to tested the 802.1X authentication deployment using the Cisco Catalyst 3560-X layer 3 switch and the Cisco ISEvl2 appliance. Each employee desktop will be connected to the 802.1X enabled switch port and will use the Cisco AnyConnect NAM 802.1X supplicant to log in and connect to the network.
Your particular tasks in this simulation are to create a new identity source sequence named AD_internal which will first use the Microsoft Active Directory (AD1) then use the ISE Internal User database. Once the new identity source sequence has been configured, edit the existing DotlX authentication policy to use the new AD_internal identity source sequence.
The Microsoft Active Directory (AD1) identity store has already been successfully configured, you just need to reference it in your configuration.
In addition to the above, you are also tasked to edit the IT users authorization policy so IT users who successfully authenticated will get the permission of the existing IT_Corp authorization profile.
Perform this simulation by accessing the ISE GUI to perform the following tasks:
– Create a new identity source sequence named AD_internal to first use the Microsoft Active Directory (AD1) then use the ISE Internal User database
– Edit the existing Dot1X authentication policy to use the new AD_internal identity source sequence:
– If authentication failed-reject the access request
– If user is not found in AD-Drop the request without sending a response
– If process failed-Drop the request without sending a response
– Edit the IT users authorization policy so IT users who successfully authenticated will get the permission of the existing IT_Corp authorization profile.
To access the ISE GUI, click the ISE icon in the topology diagram. To verify your configurations, from the ISE GUI, you should also see the Authentication Succeeded event for the it1 user after you have successfully defined the DotlX authentication policy to use the Microsoft Active Directory first then use the ISE Internal User Database to authenticate the user. And in the Authentication Succeeded event, you should see the IT_Corp authorization profile being applied to the it1 user. If your configuration is not correct and ISE can’t authenticate the user against the Microsoft Active Directory, you should see the Authentication Failed event instead for the it1 user.
Note: If you make a mistake in the Identity Source Sequence configuration, please delete the Identity Source Sequence then re-add a new one. The edit Identity Source Sequence function is not implemented in this simulation.
Answer: Review the explanation for full configuration and solution.
Step 1: create a new identity source sequence named AD_internal which will first use the Microsoft Active Directory (AD1) then use the ISE Internal User database as shown below:
Step 2: Edit the existing Dot1x policy to use the newly created Identity Source:
Then hit Done and save.
Thanks For Trying Braindump2go Latest Cisco 300-208 Dumps Questions! Braindump2go Exam Dumps ADVANTAGES:
☆ 100% Pass Guaranteed Or Full Money Back!
☆ Instant Download Access After Payment!
☆ One Year Free Updation!
☆ Well Formated: PDF,VCE,Exam Software!
☆ Multi-Platform capabilities – Windows, Laptop, Mac, Android, iPhone, iPod, iPad.
☆ Professional, Quick,Patient IT Expert Team 24/7/3194 Onlinen Help You!
☆ We served more than 35,000 customers all around the world in last 5 years with 98.99% PASS RATE!
☆ Guaranteed Secure Shopping! Your Transcations are protected by Braindump2go all the time!
☆ Pass any exams at the FIRST try!
FREE DOWNLOAD: NEW UPDATED 300-208 PDF Dumps & 300-208 VCE Dumps from Braindump2go: http://www.braindump2go.com/300-208.html (194 Q&A)